Air cooler
JK 6060JK 6060 Air cooler

JK commercial and industrial air cooler with 6,000 CFM airflow and a 60–100 L water tank, built for workshops, showrooms and warehouse bays around Faridabad.

Technical Specifications
JK 6060 — Complete Spec Sheet
Specification ParameterDetails / Value
Model NameJK Air Cooler Commercial / Industrial Cooler
Airflow Capacity6,000 CFM (approx. 10,000 m³/h)
Coverage Area600 – 800 sq. ft. (varies with heat load & ceiling height)
Water Tank Capacity60 – 100 Liters

Get In Touch

Request a Quote

Product Category

Air Cooler Manufacturer & Supplier in Faridabad — JK Commercial / Industrial Air Cooler

If you need an air cooler for a workshop, showroom, godown or factory bay, the JK Air Cooler is a commercial/industrial evaporative cooler that moves about 6,000 CFM (roughly 10,000 m³/h) and typically covers 600–800 sq. ft. JK manufactures in-house at its Faridabad unit and also supplies as an authorised dealer.  We manufacture and supply this air cooler in Faridabad and dispatch to nearby industrial areas.

Evaporative coolers work by pulling hot, dry air across wet pads and pushing it out cooler. In a space where a full air-conditioning load would be expensive to run all day, that's often the more practical way to take the edge off summer heat, and it's the reason a cooler like this makes sense for open or semi-open commercial floors.

JK Air Cooler Models and Specifications

Specification Details / Value
Model name JK Air Cooler Commercial / Industrial Cooler
Airflow capacity 6,000 CFM (approx. 10,000 m³/h)
Coverage area 600–800 sq. ft. (varies with heat load and ceiling height)
Water tank capacity 60–100 litres
Body material FRP  / Plastic
Power supply Single-phase 220V
Cooling pad type Honeycomb / Aspen

The coverage figure is a range for a reason. A 700 sq. ft. floor with a low roof and machines running all day behaves very differently from the same floor with a high ceiling and open doors. Treat 600–800 sq. ft. as the planning range, and tell us about your space if you're near the edge of it.

How to Choose the Right Air Cooler for Your Space

Three things decide whether one unit is enough: floor area, ceiling height, and how much heat is generated inside the space (machinery, ovens, crowded staff or customers).

  • Under about 600 sq. ft. with normal heat load: one JK unit is generally comfortable.
  • 600–800 sq. ft., or a hot floor: one unit works if the space is well ventilated; heavy heat load or a high ceiling may need two units placed at opposite ends.
  • Above 800 sq. ft.: plan for multiple units rather than expecting one to stretch.

One thing buyers often miss: an evaporative air cooler needs somewhere for the air to go. A window, door or exhaust opening left partly open lets the cooler keep pushing fresh air through. Fully sealed rooms build up humidity and the cooling drops off.

Where the JK Air Cooler Is Used

  • Workshops and small factory bays: where spot cooling around workers matters more than cooling the whole building.
  • Showrooms, shops and offices: open commercial floors where the AC load or running cost is hard to justify.
  • Godowns and warehouse packing areas: ventilated spaces where staff spend long hours during summer.
  • Restaurants, banquet halls and canteens (semi-open): areas with doors or shutters that stay partly open.

Air Cooler vs. Air Conditioner: Which Suits a Faridabad Business?

Evaporative cooling generally performs best during hot, relatively dry conditions. As humidity increases during the monsoon, the cooling effect of an evaporative cooler can reduce.In monsoon humidity the cooling effect reduces, because the air can't take up as much moisture.

  Air cooler Air conditioner
Works best in Hot, dry weather; ventilated spaces Any weather; sealed spaces
Running cost Lower (fan + small water pump) Higher (compressor)
Needs open ventilation Yes No
Best fit Workshops, godowns, semi-open commercial floors Closed offices, server rooms

 

What Affects the Price of an Industrial Air Cooler

We publish a quote rather than a fixed price because the final figure depends on a few concrete factors:

  • Water tank size (60 L vs. 100 L)
  • Body material and pad type
  • Motor power and blade size
  • Quantity ordered (single unit vs. multiple units for one site)
  • Any customisation such as branding, colour or stand
  • Delivery distance and installation needs

Air Cooler Supplier in Faridabad: Delivery and Service

Our unit is based at Faridabad and we deliver across Faridabad and nearby area , plus Delhi NCR on order . We and Our hardworking team has working in this Air cooler manufacturing unit since 1988.

Request a Quote for Your Air Cooler in Faridabad

Send us your floor area, ceiling height and what the space is used for, and we'll recommend the number of units and give you a quote.

What We Offer

Our Services

Loading FAQs…